DOD SR400D Spécifications télécharger pdf (Page 115)

107

 10. Open gasoline valve located under the gasoline

tank; right side of the engine.

 11. Close the choke by moving the choke lever up.

(Omit this step if the engine is already warm.)

 12. On a cold engine: place the throttle control midway

between the slow and fast positions.

 13. Pull the starter rope firmly until the engine starts.

CAUTION: HEARING PROTECTION REQUIRED.

Return the rope in one smooth motion, i.e., do not

let go of the rope!!!

 14. As the engine warms up, slowly open the choke.

 15. Put on all personal protective equipment (PPE).

 16. Fill the tank with the carrier needed, read the

pesticide label and then add the measured amount

of pesticide/herbicide to bring the formulation up to

the label's recommendations. (Adding the

pesticide/herbicide, while engine is running, aids

with mixing.) If using wettable powders, add 1 pint of

kerosene to every 100 gallons of formulation in the

tank to inhibit foaming.

 17. Keep track of the level in the tank by occasionally

examining the clear tubing at the left front of the

tank.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 115