DOD SR400D Spécifications télécharger pdf (Page 182)

174

 18. YOU ARE NOW READY FOR ULV

APPLICATION.

 19. Before attempting to calibrate, remove the

pesticide line at the nozzle and place it into a

suitable container, i.e., a 3-gallon formulation

bucket. Turn on the CV warm-up by moving the

toggle switch located on the remote operator's

station to the fog position.

 20. To calibrate the machine set the flow rate on the

digital readout by adjusting flow rate screws. First

set "course" flow rate (after loosening knurled

knob), then set "fine" adjustment. (to convert to

"pesticide label" requirements use, approximately

30 ml = 1 oz.)

 21. The rate of speed during the spray operation is

generally 5 or 10 MPH. The correct speed for

each type of pesticide is written on the pesticide

label.

 22. When stopping for a short period of time, turn off

the "fogging" switch, found at the remote

operator's station.

TERMINATING PROCEDURES

 23. After completing your spray operation, turn the

toggle switch on the remote operator's to the flush

position.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 182