DOD SR400D Spécifications télécharger pdf (Page 87)

OPERATING PROCEDURES: MISTS, SPRAYS AND ULV

 14. Ensure that the pesticide flow is off.

Mist/Sprays/ULV - turn the inline flow valve located

on control handle off (knob up). Dusts/Granules -

twist the control handle to close off discharge tube.

 15. Add the pesticide to the pesticide tank.

 16. a. Set the throttle at half speed on the control

handle and after the engine is operating

smoothly, open up the inline flow and the

metering knob (Spray/Mist), metering nozzle

(ULV) (on handle).

 b. Calibrate the system (the liquid must pass

through the metering system).

 c. For adjusting the liquid flow rate to the label and

application specifications, set the metering knob

(Mist-Spray), located on top of the nozzle, to a

different number (#1-6), or choose one of the

three optional metering nozzles (gray) for ULV.

You may make minor flow adjustments by

throttling the engine up or down.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 87