DOD SR400D Spécifications télécharger pdf (Page 19)

 8. Return the rod / piston assembly to the cylinder by

placing the piston cup at a 45 degree angle and

then gently pushing the piston into the cylinder.

Make sure that the piston cup does not crimp or

buckle -- or a good seal will not develop.

 9. Examine the pesticide hose. Be sure that the

connection sites at the tank and the spray wand

are not worn.

 10. Unscrew the wand where it connects to the

pesticide line and pull out the inline filter. Clean

the filter in solvent as required. Screw the unit back

together.

 11. Select the proper spray flow by loosening the

retaining collar on the nozzle and rotating the

nozzle to the desired setting. Screw the collar

back on making sure that the selected aperture is

directly over the pesticide exit hole in the wand.

 12. Check for proper pressurization and for of leaks in

the system by adding water to the tank. To

properly pressurize the tank, fill only about 2/3 full,

leaving about 1/3 of the tank empty for air. Replace

the tank cover and pump the unit 6-10 times.

Depress the trigger on the wand. Check for water

and air leaks in the tubing and all seals.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 19