DOD SR400D Spécifications télécharger pdf (Page 40)

 3. Check engine operation before filling the pesticide

tank. Place the throttle lever in the fully closed

position ("idle lever" down).

 4. Push the primer button to feed the fuel to the

carburetor until fuel overflows from the carburetor

(primer button located at bottom of carburetor).

 5 Close the choke by pushing the lever up (Omit this

step if engine is already warm.)

 6. Firmly pull the starter rope until the engine starts.

CAUTION: HEARING PROTECTION REQUIRED.

Return the rope to the engine in one motion (i.e.,

do not let go of the rope).

 7. After starting the engine, gradually open the choke

by turning the choke lever down and finally keep it

fully opened.

 8. Let the engine warm up by running it at a low RPM

(slow speed) for approximately one or two minutes.

STOPPING THE ENGINE

 9. Reduce the engine RPM to idle.

 10. Stop the engine by pushing the stop button

(located between starter rope and carburetor).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 40