DOD SR400D Spécifications télécharger pdf (Page 30)

 9. To stop the engine, lift the control knob to the “off”

position.

FOGGING

 10. Verify that the formulation and fuel tank caps are

tight.

 11. Start engine as specified in the above section.

 12. Allow engine 1-2 minutes running time to warm up

to operating temperature.

 13. Set formulation-metering valve (flow rate) to

desired fog quality.

 14. Push formulation valve button (thumb trigger) to

fog.

 15. Close metering valve immediately after fogging;

allow any pesticide remaining in lines to flush,

before shutting engine off.

MAINTENANCE

 16. After each use, drain any unused formulation from

the tank into its original container for proper

storage by removing 7/16” plug at bottom of the

formulation tank.

 17. Flush out machine with approved flushing solvent

after draining out formulation tank.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 30