DOD SR400D Spécifications télécharger pdf (Page 217)

209

during the flight operation. For most operations, no

more than 30 gallons of pesticide will be required

for any one spray flight. At normal dispersal rates

and flight procedures, this corresponds to 1.0 - 1.5

hours of flying time.

 32. Ensure that the provided overflow line on the tank

extends outside of the aircraft and is secured to

the boom.

 33. After pumping the pesticide into the tank, clean the

pump by pumping flushing solution through it and

into the tank.

 34. Check all power and control plugs for proper

installation and all circuit breakers to be sure they

are activated.

 35. Recheck the indicator lights.

 36. Make sure that the pesticide flow control valve is

open. The valve motor switch is interlocked (series

connected) with the pump switch and must be

open before the spraying operation can begin.

Closing the valve electronically will stop operation

of the unit. The valve is left open during the

mission.

 37. Activate the pump switch. Full flow should occur

immediately when the unit is activated.

 38. Observe each nozzle carefully to determine proper

operation (i.e., full flow). When the unit is turned off

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 243 244

Pas de commentaire

DOD SR400D Spécifications Page 217